The first of the port side hull planks to be removed as part of the hull restoration.

As part of Chance's restoration there are a number of planks being replaced as they are either rotten or incorrectly fitted because they are made up of short pieces 


This plank is quiet a length, however, it will not be the only long plank to be replaced on the hull as there a number of long planks that have to be renewed as there a number of short planks that have been replaced in the past.


The forward end of the first plank that as now been removed showing it was screwed on to one half of the double grown frame which makes up the framework of the hull.


The hull as a number of double frames that make up the framework of the hull.


One of the many ribs that have to be renewed as part of the restoration and give back the strength in the hull.


The aft end of the first plank and fixing the plank back to the double frame as it was originally build.


 

Comments

Post a Comment

Popular posts from this blog

A few spare minutes at the end of my working day, so it gave me time to do a bit of varnishing on the cockpit chart table

Image
With a spare few minutes at the end of my working day, working on client's boats. It was time to get the varnish brushes out and do a spot of varnishing on Chance's cockpit chart table. This is the drop down door on the lower part of the chart table below the chart drawers. The first of the full strength coats of epifanes varnish, just another 8 to 10 coats to go before there will be enough to seal the surface and make it hard wareing. The front looking better than it as been for sometime like the top a lot more coats of varnish to come The rich original colour shining through as we build up the coats of varnish on the important item of furniture in the cockpit. The drawers are in need of a few coats of paint on the side that are not seen, as these parts have not had any paint or varnish in a long time   
Read more

A bit quiet on the Eastern Front.

It has been a while I have posted anything on the Patreon page. It has been I have been busy with my day job as a full time boat builder and working on my client's boats and get major refits finished in time for the school holiday and some autumn cruising.  I have not forgotten about Chance and her restoration, far from it. While I have not been working on Chance herself, I have been working on some of the smaller items in my workshop and getting things sorted with these items. It has been a matter of fitting work on Chance around my day job and other family commitments. So there as been a lot of juggling going on behind the scenes.  What i do need are a few more pairs of hands to help getting some of the jobs underway on Chance's hull and frames and ribs so that we can get the starboard side sorted and the transom re-instated before the winter get here.  So if there is any one in the north Essex area who wishes to lend a hand for a few hours please contact Simon on his mobile
Read more