Update on the last stages of Chances final movement down to Essex from Woodplumpton

 Update on the movement of Chance,

Yesterday had a long drive to Woodplumpton to pick up the larger of the two trailers with the last of the bits from Chance The larger of the trailers had the last of the ballast weights we removed from the bilges earlier in the year before we cleaned out the bilges. This time it was about a ton in weight of iron weights . This with the three quarters  of ton of iron ballast weights we have already got back at the yard is quite a lot of weight we have removed from the boat. This is only a small amount of the weight we have removed, one a quarter tons of  which the engines weighted and the fuel and water tanks and the stern gear which as also been removed. Then a lot of furniture as come out of the interior of the cabins so all that is left is the bulkheads which are still in position keeping the boats shape. 


So it is one final trip to Woodplumpton on Monday to pick up the smaller trailer and supervise the loading of Chance on to transport fro her trip back to Walton on the Naze. Chance should be arriving on Tuesday to get off loaded at Walton on the Naze for the family and I to get on with the restoration with her near to my workshop. This will make  the restoration a lot easier to do and control.  


Comments

Post a Comment

Popular posts from this blog

A big shout out for a cover to put over Chance so we can get on with the restoration of Chance.

Image
 At the moment we are in this position with Chance, We have a large poly sheet over Chance which keeps getting blown off as we can not fix it down very well and is a thankless task having to keep pulling over the boat until the next major gale of strong wind decides to remove the cover again.  That's the position at the moment, what we are looking for is a shed/workshop like the one over Helen Wycherley Heritage Restoration project in Whitby North Yorkshire. This type of shed/ workshop would do our restoration project a world of good and make possible for us to get on with our restoration of Chance.    So if anyone out there can put us in contact with anyone who wishes to move on their poly tunnel shed/ workshop, please get in contact with us through our social media channels. This would help our restoration project get underway again. Te cost of building a new shed is way out of our price range and without some help it is looking in a grave way as to how to move for...
Read more

Chance Autumn update

As many of you will have seen from the lack of updates there as been little work done on Chance over the summer. This as been due a lack of time and more over a lack of funds to do major task done on Chance. especially the removal of the middle and aft section of the starboard beam shelf and reconstructing the transom and its framework which holds it in position.   However, all is not doom and gloom, has I have been able to take on an apprentice to help me during the working week on my clients boats and leave myself and wife time to get on with working on Chances repairs.  So hopefully over the coming week's we should be able to make a start on getting the beam shelf removed and replaced with a new correctly fitted beam shelf which will bring the hull back into position  along with the ribs and frames which have to be replaced at the same time to get the hull back into its correct position once more.  There is going to be a lot of shoring up of the starboard sid...
Read more

Next Job at the stern of Chance is going to be to remove the Rudder on Chance

Image
 Now having removed a number of planks on either side of the hog as found that the inner hog is in need of replacing. This means that we will have to remove the rudder tube. This means having to remove all the frame work from the transom to expose the rudder tube. The rudder tube in this photo is sitting on two shaped wedges on top of the hog.  Also all this aft deck planking is going to have to be removed as well. no easy job as it was laid down with galvanized screws which have been in place for almost 80 years and will very likely not come out without a lot of damage to the teak decking, so it is likely we will cut off the screws between the deck and the deck beams. This is not a problem as the deck beams have to be replaced anyway because at one end they are not fixed and at sometime in the past were cut short. So now the fun will start dismantling the aft end of the boat more to get the hog repaired and the whole of this area rebuild as strong as when it was first build....
Read more