Starting to pull the starboard side back towards its original position and see how far out it is.

This photo of the final deck beam so how far out the deck is with that of the beam shelf and how far it is going to have to be raised to come any way near the correct height to the beam shelf. 


The carlin and the beam shelf are both going to be replaced, however, first the original carlin and beam shelf have to be in the correct position before they are removed and new bit put in position. 


Also the boat hull will have to be pulled back together to be the correct width along the side deck and when the new carling and beam shelf and deck beams are refitted the tie rods will be refitted and the whole side deck will be in the correct position as it was originally build.


Here the boat as spread about two inches and will have top be pulled together with a block and tackle and then a pair of eye bolts and a bottlescrew and chain to hold the hull together while the beam shelf is removed and remade and fitted.


The old processes of pulling together a boat hull still work without the use of modern tools a Spanish windlass still works when used correctly.


The lodging knee is holding the deck beam from moving as it is pressed against the beam shelf which is not in the correct position and will have to be lifted up to clear the beam shelf.


Having lifted the deck by propping up the deck beam and taking off the pressure on the hull planking the frame as now lifted itself into its original position and shows how far the hull as dropped away from its original shape and position. 


The forward aft deck beam is going to have to be propped up more to to line up with the beam shelf  so more jacking is going to have to be done to get this deck beam in the correct position.


Putting a plank across the aft deck to the beam shelf as brought the deck beam closer to the correct height, however, the hull is still in need of bring together more with the use of the Spanish windlass. 




 

Comments

Popular posts from this blog

Engine filters from 70 years ago, all the parts can be washed and refitted non disposable parts, so no land fill

A year on since we started our restoration on Chance and now getting ready for the next stage, her moving home to Essex

Plans for the New Year and Beyond