Removing the steering turning block off the inside of the hull to regain the correct shape of the hull

Having looked at the shape of the hull for some time, it appears to me that the steering block was fitted when the hull had already changed shape and that removing the block will release the planking to come back to more or less the original shape. It appears from taking measurements off the port side that the plank  widths are different on the starboard side to the port side in that there are a major different in their wides. This would account for the next shape in the hull. so by removing the block and removing every other plank it may well d=change the shape back toward its original shape.


As there are only four bolts holding the block in position this should be straightforward once the block is removed and the planks can lay as they should do. 


In this photo I have made a started on propping up the hull, I just need to use more props to get to the correct position for the final frame plank bevel. I have some lengths of timber inside the aft cabin for just this job. 


Also I have to support the aft deck beams on the starboard side and get the deck beams up to the correct position once more as well.

 

Comments

Popular posts from this blog

Engine filters from 70 years ago, all the parts can be washed and refitted non disposable parts, so no land fill

A year on since we started our restoration on Chance and now getting ready for the next stage, her moving home to Essex

Plans for the New Year and Beyond